JBD BMS strange values for hardware overcurrent protection

[isso777]

I'm looking at the values of JBD BMS "Hardware overcurrent protection" and "Hardware short circuit protection" and they are surprisingly low, see the screenshot - the former is set to 33A and the latter is set to 111A, while this is a 100A BMS that has the software Continuous maximum current set at 110A.
I guess I should multiply these "Hardware" values by 10?

 

[SupraSPL]

My 200A JBD says 610A for this setting when I look at "PARAMETER VIEW" but it says 61A when I look at "PARAMS SETTING"

When you click it, the drop down box has a set of choices from 17 to 100. The default was 61 on mine so it multiplies x 10 automatically and you actual setting is 330A.