ajtarnas
New Member
- Joined
- May 30, 2022
- Messages
- 30
Vendor ID: JK-B2A20S20P
Serial Number: 2052316096
Hardware Ver: V10.XW
Software Ver: V10.09
Version: V4.8.5
iphone se2020 ios15.5
i have a jk on my 16s 280ah 14.4kwh EVE cell LFP bank, just like offgrid garage.
the bms app on my iphone does not show discharge current or watts. i'm used to the xiaoxiang bms app and the overkillsolar bms (rebranded JBD bms), which shows net charge or discharge in watts.
i see videos of the jk bms app showing net charge or discharge in positive or negative amps -- less useful and silly in my opinion, but acceptable. but my app does not show discharge, only positive amps for charging.
i do not have a shunt on the system. the jk instructions do not seem to call for one. am
i missing something? (@Nami is this your area of expertise?)
Serial Number: 2052316096
Hardware Ver: V10.XW
Software Ver: V10.09
Version: V4.8.5
iphone se2020 ios15.5
i have a jk on my 16s 280ah 14.4kwh EVE cell LFP bank, just like offgrid garage.
the bms app on my iphone does not show discharge current or watts. i'm used to the xiaoxiang bms app and the overkillsolar bms (rebranded JBD bms), which shows net charge or discharge in watts.
i see videos of the jk bms app showing net charge or discharge in positive or negative amps -- less useful and silly in my opinion, but acceptable. but my app does not show discharge, only positive amps for charging.
i do not have a shunt on the system. the jk instructions do not seem to call for one. am
i missing something? (@Nami is this your area of expertise?)
Attachments
Last edited: