I have 17 sunvira series s mvx 300 panels and 9 sunvira mvx inverters. I do not have any controllers or wiring . I made some wiring and can produce 12 v power out the ying yang and have regulators to keep a bank of 12 v batteries charged (4) . I use inverters to produce the AC power for powering chargers & small power tools . I would like to get the mvx series inverters producing Ac power. I have assumed that I need a device to activate them . BUT , I am hopeing I can find a way to activate them with out purchasing a expensive device to do the job . mine have 5 wires on the out put side ,1 black, 1 red ,1 blue, which are listed as line 1 & 2 &3 1 white listed as neutral and 1 green listed as ground . Would like to feed what ever it takes back to the correct wire , to get one of the out put lined to produce ac power .
I will only us this ac , discontected from my power grid and only when I am present. Can it be done ????? and which wire to I send power back to the regularter and what type of power .
I will only us this ac , discontected from my power grid and only when I am present. Can it be done ????? and which wire to I send power back to the regularter and what type of power .