Just Hit 1 MWh on the Victron

[CoolWill]

Just crossed the 1 megawatt-hour mark this morning on the Victron MPPT RS 450/200. Glad I got here when I did else I would have missed it. That is all.

 

[AlpineJoe]

View attachment 171717View attachment 171718

Just crossed the 1 megawatt-hour mark this morning on the Victron MPPT RS 450/200. Glad I got here when I did else I would have missed it. That is all.

Sorry for the dumb question - what Victron product is your photo of? I'm looking to get an MPPT SCC with at least 200V input and I see yours will do over that by quite a margin.

 

[Adam De Lay]

Looks like the 450/200

 

[42OhmsPA]

Just crossed the 1 megawatt-hour mark this morning on the Victron MPPT RS 450/200. Glad I got here when I did else I would have missed it. That is all.

Sorry for the dumb question - what Victron product is your photo of? I'm looking to get an MPPT SCC with at least 200V input and I see yours will do over that by quite a margin.

 

[WolfbaneAries]

Awesome. When did you install it?

 

[CoolWill]

Awesome. When did you install it?

Mid August.

 

[1201]

Nice. What's the idle consumption?

 

[CoolWill]

Nice. What's the idle consumption?

Almost nothing. Right before the screen goes dark for idle mode the controller itself is 10 watts. I haven't measured it after that. The inverter pulls 30 watts with no load but there is some building loads like exit lights and the outside lights run from 7 PM to 1 AM.

 

[1201]

That's impressive!

Almost nothing. Right before the screen goes dark for idle mode the controller itself is 10 watts. I haven't measured it after that. The inverter pulls 30 watts with no load but there is some building loads like exit lights and the outside lights run from 7 PM to 1 AM.