Looking to start a beginner Off-Grid Solar System, With 6000XP and LiFePO4 Battery.

[nhatey]

I have my planned diagram below. I apologize for the inexperience but for Load, can I simply use a Surge Protector or Extension Cord cut and stripped? For the GRID IN is there a specific cable I should look for? Or will a cut and stripped extension cord be sufficient as well?


I was looking at the suggested "Complete DIY 48V Offgrid Solar Power System" with a combiner box and load center. What is the benefit of a box and load center? I think a combiner box is required for multiple Inverters, and the load center is just a simple way to separate circuits.

 

[nhatey]

I was partially inspired or might just do the hand truck:

Mobile 3,000W System

Dead Simple Solar Power System! 3,000W AC Output 1,800W AC Input 5,000W PV Input PV Voltage Range: 120-500V Scalable Easy to Build! This took me 25 minutes Can be mobile or stationary Turn off the...

www.mobile-solarpower.com

 

[nhatey]

It also looks like I did the wiring wrong should look like this

 

[EG4_Jared]

I would recommend wiring the Grid, GEN, and Load inputs with 8awg wire from the manual. Also, watching this video which goes over a short installation of these inverters.

Link to manual: https://eg4electronics.com/categories/inverters/eg4-6000xp-all-in-one-off-grid-inverter