I recently bought 4 206ah 12v SOK LiFePO4 batteries and want to replace my 2 100ah 12volt Battleborns. I'm wondering if I can just keep the default Li-ion settings or should go with another default setting.
Here are battleborns charging specs:
SOK webiste for the battery: https://www.us.sokbattery.com/product-page/12v-206ah-lifepo4-lithium-iron-phosphate-battery-pack
But current connected website has some more specific that might suggest that I need to be more specific. https://www.currentconnected.com/product/sok-sk12v206-lifepo4-battery/
Is there a downside to where I could damage the battery with these default settings or will I just not be efficent until I can make manual changes. Mastervolt requires the purchase of a $200 "connector" to update the charge settings, but just want to see if I can put in these new batteries and get the charge settings figured out later.
Here are battleborns charging specs:
SOK webiste for the battery: https://www.us.sokbattery.com/product-page/12v-206ah-lifepo4-lithium-iron-phosphate-battery-pack
But current connected website has some more specific that might suggest that I need to be more specific. https://www.currentconnected.com/product/sok-sk12v206-lifepo4-battery/
Is there a downside to where I could damage the battery with these default settings or will I just not be efficent until I can make manual changes. Mastervolt requires the purchase of a $200 "connector" to update the charge settings, but just want to see if I can put in these new batteries and get the charge settings figured out later.