hackenstein
New Member
- Joined
- Mar 29, 2022
- Messages
- 69
Im letting it rest now and active balancing is on.If you have to turn off charging to prevent the BMS from shutting off due to over current protection, your charging voltage is too high. What is it now, Screen shot??
Not completely sure what behavior you are describing. The goal is to charge with Constant Voltage of 28.0V (3.5V per cell) until all the cells are balanced within 10mV.
When I put 27,2 on the bank the cell is running so its hard to get that 10mV difference.
I can send u a new screenshot when charging when it has rested.
Attachments
Last edited: