Just hooked up my bms and it is not giving me correct voltages, here is a screenshot of dashboard. Thoughts on what maybe wrong. I checked voltages in the connector before hooking it to the bms and it read all voltages through the leads.
Found that post they are using ios app and I'm on android and it is configured differently and does not have that settings. Thank you for the help, I couldn't do this without everyone's help
Found the problem. I only had bms wires connected, and did not have the main negative wires connected, hooked them up and all is good.
I was just going to use bms to monitor battery will top balancing learned something new.
