So my setup is 3.29v lifeboat cells X 4 to create 12v battery with 272amps. I have two of these to provide 544 amps. Each is controlled by an overkill solar bms.
the bms read data screen prints below. I adjusted the total battery capacity to 272000, total cycle capacity to 80% of that. I’m not sure these are set correct:
Cell full voltage
Cell min voltage
Cell 80%, 60%,40%, 20%
all Protections.
help!
Tia from a newbie
the bms read data screen prints below. I adjusted the total battery capacity to 272000, total cycle capacity to 80% of that. I’m not sure these are set correct:
Cell full voltage
Cell min voltage
Cell 80%, 60%,40%, 20%
all Protections.
help!
Tia from a newbie
Attachments
-
1A7084C1-2EB8-407B-8A5E-D573A145BC6A.jpeg159.3 KB · Views: 33
-
E05B1290-51B8-4E47-9744-C8902CA4E5AD.jpeg129.8 KB · Views: 34
-
0F07B7A8-9BB9-41AA-8A6E-C06C86FA9D0D.jpeg125.7 KB · Views: 25
-
20A2F049-CB2F-4594-88DE-2A60D32AA3D6.jpeg160.7 KB · Views: 24
-
02E27D19-2B4B-4E54-ABB8-F5EC24C33744.jpeg129.9 KB · Views: 23
-
1D9A9728-603D-4FB6-AC1A-BB580B2FDD64.jpeg125.8 KB · Views: 35