Safety check

[noenegdod]

Well right now it’s 20 degrees so that’s the least of my concern

Today you problems have a tendency to take precedence over tomorrow you problems but tomorrow you problems have a way of being forgotten until they are 100X worse than they needed to be. The multiplus can be shut down based on temperature and came with the sensor. Id at a minimum implement that.

It looks like this: https://www.victronenergy.com/accessories/temperature-sensor-qua-pmp-venus-gx

 

[noenegdod]

I appreciate the safety concerns, I live in this vehicle full-time and it’s 20° out, I need everything working properly I need to be able to charge my batteries quickly and efficiently. Springtime I can revisit reorganizing as the weather warms up, right now I’m in survival mode and frankly I just need all of this working properly and I needed to make sure that I’m gonna start a fire

As long as it’s technically doable , I’m good with it for now

Godspeed my friend

I hope that is not a Freudian slip.

 

[EricR]

My build was also space constrained, so I had to go with a two-layer configuration. Maybe something in this will be helpful, for the spring, if you decide to reconfigure your system:

https://diysolarforum.com/threads/u...o-conversion-–-compact-two-layer-build.32563/​

-Eric