Seplos 200Ah BMS

[brandnewb]

Their manuals are in Chinglish. Poor conversion from Chinese to English. The product works fine.

But if the product works fine, then why the many threads about it concerning issues?

 

[houseofancients]

But if the product works fine, then why the many threads about it concerning issues?

omdat sommige hier echt vol idioten zijn

next to that, every product used often have stuff going on, ot folks buying it without reading the specs or knowing what they buy

 

[brandnewb]

omdat sommige hier echt vol idioten zijn

next to that, every product used often have stuff going on, ot folks buying it without reading the specs or knowing what they buy

--- dutch insders section --
ok ik ga er van uit dat ik daar onder val als idoot
-- end dutch insiders section

rough translation. Ok so I assume I am amongst those idiots.

 

[houseofancients]

--- dutch insders section --
ok ik ga er van uit dat ik daar onder val als idoot
-- end dutch insiders section

rough translation. Ok so I assume I am amongst those idiots.

- nee hoor jij niet, je stelt vragen en bent nieuwsgierig en doet onderzoek, dat is juist hoe je het wel zou moeten doen
-

nope being curious and doing your homework is never idiot behavior

btw, for those looking for the 10d (rs485) version of the 200a version ;
since i swapped out my inverters i do have one for sale in the EU.

PM for details

 

[Sanwizard]

- nee hoor jij niet, je stelt vragen en bent nieuwsgierig en doet onderzoek, dat is juist hoe je het wel zou moeten doen
-

nope being curious and doing your homework is never idiot behavior

btw, for those looking for the 10d (rs485) version of the 200a version ;
since i swapped out my inverters i do have one for sale in the EU.

PM for details

Would you know if the 10D version can be master to slave 10C versions? I am hoping to not have to replace all of my BMS's.

 

[houseofancients]

Would you know if the 10D version can be master to slave 10C versions? I am hoping to not have to replace all of my BMS's.

to be honest, never tested that.
i swapped out my axperts for canbus capable inverters, so never got around to it

 

[Greenwatts]

Would you know if the 10D version can be master to slave 10C versions? I am hoping to not have to replace all of my BMS's.

I think not.
1OD and 10C work on different baudrates

 

[Sanwizard]

I think not.
1OD and 10C work on different baudrates

Crap. I have seven of them. The LVX6048WP does not talk CAN.

 

[houseofancients]

Crap. I have seven of them. The LVX6048WP does not talk CAN.

didnt you buy your lvx's with ian ?
he seems to have short lines to mpp/voltronics and these inverter have a dual port, canbus simply isn't activated ( or reserved as they put it).

maybe he can pull some strings for you ?

 

[Sanwizard]

didnt you buy your lvx's with ian ?
he seems to have short lines to mpp/voltronics and these inverter have a dual port, canbus simply isn't activated ( or reserved as they put it).

maybe he can pull some strings for you ?

Yes I did. I will give him a call. Good idea.

 

[Mark-]

didnt you buy your lvx's with ian ?

Who is "Ian"?

 

[houseofancients]

Who is "Ian"?

Watts247

 

[Mark-]

Watts247

Thanks