brandnewb
Going for serious. starting as newb
But if the product works fine, then why the many threads about it concerning issues?Their manuals are in Chinglish. Poor conversion from Chinese to English. The product works fine.
But if the product works fine, then why the many threads about it concerning issues?Their manuals are in Chinglish. Poor conversion from Chinese to English. The product works fine.
omdat sommige hier echt vol idioten zijnBut if the product works fine, then why the many threads about it concerning issues?
--- dutch insders section --omdat sommige hier echt vol idioten zijn
next to that, every product used often have stuff going on, ot folks buying it without reading the specs or knowing what they buy
- nee hoor jij niet, je stelt vragen en bent nieuwsgierig en doet onderzoek, dat is juist hoe je het wel zou moeten doen--- dutch insders section --
ok ik ga er van uit dat ik daar onder val als idoot
-- end dutch insiders section
rough translation. Ok so I assume I am amongst those idiots.![]()
Would you know if the 10D version can be master to slave 10C versions? I am hoping to not have to replace all of my BMS's.- nee hoor jij niet, je stelt vragen en bent nieuwsgierig en doet onderzoek, dat is juist hoe je het wel zou moeten doen
-
nope being curious and doing your homework is never idiot behavior
btw, for those looking for the 10d (rs485) version of the 200a version ;
since i swapped out my inverters i do have one for sale in the EU.
PM for details
to be honest, never tested that.Would you know if the 10D version can be master to slave 10C versions? I am hoping to not have to replace all of my BMS's.
I think not.Would you know if the 10D version can be master to slave 10C versions? I am hoping to not have to replace all of my BMS's.
Crap. I have seven of them. The LVX6048WP does not talk CAN.I think not.
1OD and 10C work on different baudrates
didnt you buy your lvx's with ian ?Crap. I have seven of them. The LVX6048WP does not talk CAN.
Yes I did. I will give him a call. Good idea.didnt you buy your lvx's with ian ?
he seems to have short lines to mpp/voltronics and these inverter have a dual port, canbus simply isn't activated ( or reserved as they put it).
maybe he can pull some strings for you ?
Who is "Ian"?didnt you buy your lvx's with ian ?
Watts247Who is "Ian"?
ThanksWatts247