MountainSteader
New Member
- Joined
- Oct 29, 2020
- Messages
- 20
Hello there.
I have two Sungold Power SP6548 in parallel. They are configured correctly to be parallel. I have done all the wiring, and everything works well for output power.
Battery bank: 5 SOK 48V
Solar: Not connected yet
Utility: A new Firman 9200/7500 w generator connected as utility input through a double breaker in a small 70 amp panel serving both inverters as input.
I cannot get the inverter to charge my battery bank. There is no sign of charging on the display, although when I flip on the input breaker between generator and inverters it shows correctly as input ... voltage and hz....
I have tried setting program 01 to SBU as well as USB...but no difference. Charge light is not coming on, and display does not show it is charging.
Program 05 is set to USE and 26, 27 and 29 is set to recommended SOK battery values.
Anyone smart out there with some ideas or hints...?
I have two Sungold Power SP6548 in parallel. They are configured correctly to be parallel. I have done all the wiring, and everything works well for output power.
Battery bank: 5 SOK 48V
Solar: Not connected yet
Utility: A new Firman 9200/7500 w generator connected as utility input through a double breaker in a small 70 amp panel serving both inverters as input.
I cannot get the inverter to charge my battery bank. There is no sign of charging on the display, although when I flip on the input breaker between generator and inverters it shows correctly as input ... voltage and hz....
I have tried setting program 01 to SBU as well as USB...but no difference. Charge light is not coming on, and display does not show it is charging.
Program 05 is set to USE and 26, 27 and 29 is set to recommended SOK battery values.
Anyone smart out there with some ideas or hints...?