Victron Charger connected to Blue Sea distribution block?

[0e003402d9ed253c88a603]

Hi all, I’m building a mobile power station centered around a 200Ah LiFEPO4 battery. At some point there will be a solar panel and charger incorporate, in the meantime I’ll charge it on the mains power (using home solar). Is there any issue with wiring the Victron 15A charger to a spot on the Blue Sea 6-way distribution block? Yes, I could put the charger directly to the terminals but for my lower power side (<30A) I wanted to wire everything to the distribution block. Given the charger is 15A, the distribution block is 30A per channel and there there is a 100A MRBF on the battery to the distribution block.

Thoughts?

 

[sunshine_eggo]

Should be fine if all wires are properly sized and fused.

 

[Crowz]

I have several victron chargers like that connected to bus bars like your talking about so yes it works great.

 

[0e003402d9ed253c88a603]

Thanks @sunshine_eggo and @Crowz !

 

[Suijkerbuijk]

No problem.
My mppt is not connect on the battery .

battery to big switch than to a victron battery protect.
On the battery protect on the input are my mppt connect on it .

It charge just fine and no problem at all.