Current setup is an 18 KPV with 6 LifePower 4 batteries.
I recently received another 6 batteries and a Lynx Distributor from SS. Can't wait to get the cables I ordered, so I can hook this up (grrr....).
Anyway, I want to add a chargeverter to the mix.
My question is does it matter how I connect the 2 battery banks and the chargeverter to the Lynx?
i.e. there are 4 slots.
does it matter if I do:
Slot 1 Bank 1
Slot 2 Bank 2
Slot 3 Chargeverter
Slot 4
Or should I do:
Slot 1 Bank 1
Slot 2 Chargeverter
Slot 3 Bank 2
Slot 4
I ask because I obviously want to maintain balance between the two banks, and maybe the location of the chargeverter matters on the bus. I assume not, but figured I would bounce it off the smarter people.
I recently received another 6 batteries and a Lynx Distributor from SS. Can't wait to get the cables I ordered, so I can hook this up (grrr....).
Anyway, I want to add a chargeverter to the mix.
My question is does it matter how I connect the 2 battery banks and the chargeverter to the Lynx?
i.e. there are 4 slots.
does it matter if I do:
Slot 1 Bank 1
Slot 2 Bank 2
Slot 3 Chargeverter
Slot 4
Or should I do:
Slot 1 Bank 1
Slot 2 Chargeverter
Slot 3 Bank 2
Slot 4
I ask because I obviously want to maintain balance between the two banks, and maybe the location of the chargeverter matters on the bus. I assume not, but figured I would bounce it off the smarter people.