kscessnadriver
New Member
I'm looking into an install using a one of Growatt's Whole Home Backup systems, due to a total lack of space in my pre-existing panelboard. Home is currently powered off of a Siemens 200A panelboard (with a 200A rated bus), 40 slot/40 circuit, which is completely full at the time. I had been contemplating moving some loads to a sub-panel, in order to free up slots for a potential backfed breaker, but by the time I screw around with that, coupled with a derate of the main breaker, I feel like installing the SYN-200 between my current meter and panelboard is probably the simplest method to get done what I want to do.
So, my question is, does anyone have any first hand experience in using one of these systems? It appears that the latest model allows for connection of up to 3 inverters into the system, which gives me room for down the road, should I choose to expand.
Initially I'd probably pair the SYN-200 with a MIN-11400TL-XH-US inverter. Any kind of battery install is something down the road quite a bit for me, maybe not at all
So, my question is, does anyone have any first hand experience in using one of these systems? It appears that the latest model allows for connection of up to 3 inverters into the system, which gives me room for down the road, should I choose to expand.
Initially I'd probably pair the SYN-200 with a MIN-11400TL-XH-US inverter. Any kind of battery install is something down the road quite a bit for me, maybe not at all