TrailAgent
New Member
- Joined
- Feb 8, 2021
- Messages
- 18
I am building a 24v 280AH battery bank that will be installed in a van conversion. The bank will consist of 8 cells and 1 24v Overkill BMS. For the ease of installation and possible removal, is there a problem with building two 12v banks and then connecting those banks with short 2/0 wires and still manage the combined banks with the single 24v BMS? Or, do I need to either: (a) connect all 8 cells with the same type of copper bus bars if I use the single 24v BMS; or (b) use two 12v BMS units?