RobOfYork
New Member
- Joined
- Mar 28, 2021
- Messages
- 36
Has anyone replaced the 2 AWG power cables on the DALY 250A with 2/0 AWG cables? If you did, how did you attach the larger cables to it?
My build is all 2/0 AWG to the bus bars and inverter. Not sure about those 2 AWG cables on the BMS. Would love to up them to 2/0 AWG so they are not the weak point of the system. Mani circuit is fused with a 250A ANL fuse.
My build is all 2/0 AWG to the bus bars and inverter. Not sure about those 2 AWG cables on the BMS. Would love to up them to 2/0 AWG so they are not the weak point of the system. Mani circuit is fused with a 250A ANL fuse.