AlaskanNoob
Solar Enthusiast
- Joined
- Feb 20, 2021
- Messages
- 913
Saw Will's video on these dirt cheap batteries. The 300AH ones are out of stock, so I'm looking at 12 of the 200AH ones to be charged by a Victron 450/200. I just want to make sure I could wire these up into a 48V battery bank and charge them efficiently with the SCC.
Any issues if I connect 4 of the batteries in series to get 48V/200AH and then wire that in parallel with two other sets of 4 (48V/200AH) for a final bank of 48V/600AH?
And assuming I did so, the Victron 450/200 should be able to charge them at 48V and pump 200amps into them to charge the bank in about three hours, correct?
Just wanted to make sure I'm thinking about this correctly. Thanks for any help as usual!
Any issues if I connect 4 of the batteries in series to get 48V/200AH and then wire that in parallel with two other sets of 4 (48V/200AH) for a final bank of 48V/600AH?
And assuming I did so, the Victron 450/200 should be able to charge them at 48V and pump 200amps into them to charge the bank in about three hours, correct?
Just wanted to make sure I'm thinking about this correctly. Thanks for any help as usual!