nickfarr
New Member
- Joined
- Oct 29, 2021
- Messages
- 1
Howdy all! I have two Jakiper JK48V100s attached to a Growatt 3000TL (LVM-ES) that are operating pretty flawlessly with the Growatt set to AGM mode. Honestly, it's the easiest off-grid setup I've ever worked with.
However, the totally inaccurate SOC is a little annoying. I saw the video on connecting the 5000ES in this thread, and I suppose the process is similar. However, the manual says to connect the Growatt to the CAN port, and the instructions for parallelizing say to alternate using the RS485 ports presumably so the batteries can communicate with each other in parallel.
@Zhoulun: Any ideas? Thanks!
However, the totally inaccurate SOC is a little annoying. I saw the video on connecting the 5000ES in this thread, and I suppose the process is similar. However, the manual says to connect the Growatt to the CAN port, and the instructions for parallelizing say to alternate using the RS485 ports presumably so the batteries can communicate with each other in parallel.
@Zhoulun: Any ideas? Thanks!