DurkaDurka
New Member
- Joined
- Jun 7, 2022
- Messages
- 73
I have a Victron 100/50 MPPT and Giandel 2200 watt inverter that need to be attached to a 12 V battery. Opinions on stacking 1/0 and 8 gauge tinned copper lug terminals on the inverter 12V terminals? I can easily offset them 30-45 degrees to keep the terminals flat. The 1/0 is battery side, the 8 is MPPT side. Cables are under 2 - 5 ft (round trip). Current on inverter side will not exceed 125A (intended draw is well under 1500 watts).
I'm hoping to avoid a bus bar as I don't intend to wire any other high current devices on the 12 V side.
I'm hoping to avoid a bus bar as I don't intend to wire any other high current devices on the 12 V side.