I’m looking to replace my 24V Magnum MS4024PAE inverter with two of the 4448 (48V) versions (stacked). I will use a 240V generator TBD for charging my bank. What should my inverter setting be for Max Input Amps if I want to charge at the max continuous 60ADC (x2=120A for stacked) and the rest of the available power used to run loads (assume continuous).
I have the ME-RTR remote/router already and for my existing single MS4024PAE it has a max Input Amps limit of 60. Will this setting maximum change based on having 2x4448s instead? The AC Input limits for 240V starts to confuse me is why I'm asking.
Once I know the max Input Amps my setup can utilize, I can figure out my generator to inverter cable size (~22') and choose a generator.
Spec Sheet is below and here is the link to the manual for both 24V & 48V: https://www.dropbox.com/scl/fi/e81e...4PAE.pdf?rlkey=4u4yoqfhs0qda17e5of3xjszx&dl=0
Thanks in advance!
I have the ME-RTR remote/router already and for my existing single MS4024PAE it has a max Input Amps limit of 60. Will this setting maximum change based on having 2x4448s instead? The AC Input limits for 240V starts to confuse me is why I'm asking.
Once I know the max Input Amps my setup can utilize, I can figure out my generator to inverter cable size (~22') and choose a generator.
Spec Sheet is below and here is the link to the manual for both 24V & 48V: https://www.dropbox.com/scl/fi/e81e...4PAE.pdf?rlkey=4u4yoqfhs0qda17e5of3xjszx&dl=0
Thanks in advance!