mantis_solar
New Member
Hi, I'm putting in a small system with a Lynx distributor. I have 5 cables and the Lynx only has 4 lugsn besides batther. I was thinking doubling up on the two Victron MPPTs, one is 75|15 and the other 100|50. If I size both cables for 50a then can I safely just have a 60a fuse in the Lynx, or do I need to put inline fuses in each cable?
In case anyone has other insights, the other inputs are an Orion 30a, a WFCO 25a and a Phoenix 1800 inverter. 600w of panels. Battery is a 270 ah Li Time, and I expect to add a second one in parallel soon. Eventually I'm planning on adding an ip43 to get around the WFCO current limits which will create another 2 cables - 1 lug situation.
Thanks!
Jim
In case anyone has other insights, the other inputs are an Orion 30a, a WFCO 25a and a Phoenix 1800 inverter. 600w of panels. Battery is a 270 ah Li Time, and I expect to add a second one in parallel soon. Eventually I'm planning on adding an ip43 to get around the WFCO current limits which will create another 2 cables - 1 lug situation.
Thanks!
Jim
Last edited: