Epever 40a & 24v BYD LifePo4 settings

[BarkingSpider]

Does anyone have a good set of values to use with my Epever 40a Triron and a 24v 3.5kw BYD LifePo4 battery?
There is about 20 settings in the”User” battery section. Some obvious, some not.
There are many connect/disconnect/reconnect values which see to overlap.
Thanks ... Joe.

 

[Chris_Telting]

I have the same but I think the answer is in two parts. One profile for longevity which I think most people would use and another for full capacity while one might use for complete charge discharge cycles.

Ever find the answer? I'm currently scouring the board. Had the battery hooked up for a couple days with only 4 panels.

Got a ground rod in and will be grounding later. Not sure I should ground the battery. Doubtful about that. But definitely want to breaker or fuse the whole system such that it protects the equipment prevents fires.

I'll post my setup and settings when it's done for the next guy.

 

[ghostwriter66]

I have the same but I think the answer is in two parts. One profile for longevity which I think most people would use and another for full capacity while one might use for complete charge discharge cycles.

Ever find the answer? I'm currently scouring the board. Had the battery hooked up for a couple days with only 4 panels.

Got a ground rod in and will be grounding later. Not sure I should ground the battery. Doubtful about that. But definitely want to breaker or fuse the whole system such that it protects the equipment prevents fires.

I'll post my setup and settings when it's done for the next guy.

Ground the system but not the battery ...