Most reacted threads

I moved my solar setup today from an uninsulated area to an insulated one to keep the batteries warm. I hooked everything back up, pushed the power button on the 6500ex, and absolutely nothing happened. No lights, no sound, nothing. Thinking that maybe it didn't have enough power to start I...

I'm starting to regret my purchase after watching Will's review, but at this point it is what it is. We are off-grid and living in our rv trailer while we build our house. I purchased the 6000ex instead of the 6500 expecting that I could use a single one to power everything and then bought a...

Brand new here and grateful to have found this forum. We recently bought 4.5 acres very off grid to live and farm. We found a great deal on the latest model of DC Solar trailer and brought that out for our power. This has 10 265 watt panels, Midnite Classic controller, 2 SMA Sunny Island...

I have a DC Solar trailer (10x265 panels, 2 FLA batteries, Midnite Classic 1500, 2 Sunny Island inverters) and it just isn’t cutting it for the amount of power we need. I just bought 60 260 watt panels to build a much larger system. Can I tie these panels in to the trailer? I’ve heard some...

I am finally trying to connect our inverter to the network and install the app so I can monitor things without having to run out to the inverter panel. We specifically chose to not have a password on our network and the SolarPower app is balking at this, not letting me advance through the...

I am planning on buying some of these batteries: https://signaturesolar.com/eg4-lifepower4-lithium-battery-48v-100ah I understand that they need to be in an insulated space to prevent them from charging in below-freezing conditions. But then I've also heard that batteries need to be in a...

One of my Lifepower4 batteries isn't turning on, so Signature Solar told me to run the BMS software from my computer. I have it downloaded and extracted and found my correct port to use. I have the CAT - USB cable plugged into my 0 battery and the other batteries all plugged into the RS485 ports...

I have 6 Life power 4 batteries and the 6000ex split phase inverter. Suddenly the inverter showed fault code 07 (overload) even though no new loads were put on it. I shut off the breaker from the batteries to the inverter and turned the inverter off, but it took about 15 minutes for the alarm...