I got mine late on Wednesday afternoon… I didn’t think the inverter would be that big and heavy its about 100lbs… I got it installed temporarily that night took me till 11pm. I crimped the battery cables and the input/out wires.. but it was worth it after i turned it On. the lugs for the ac...
I Don’t want to be rude but i really don’t care if its not about the device, if you want take legal action, please not here your misleading the topic..
Been playing with HA integration with GSL inverter and my Tesla Solar/Powerwall system.. HA been doing graet to control the ac charging of the GSL inverter, HA always equalize the tesla solar production between the DIY battery and the tesla powerwall to charge them.. i also use the grid peak...
I've helped couple of owners of 18Kpv, LXP-12K, and 12 GSL, I gave them my personal number, so i can real time remotely when I'm looking at their setting, I always asked permission before changing their setting even do i could but I'm not like that.
12kw Inverter Fan start and stop logic.
START : Total power higher than 6kW or max.
START : Inner temperature higher than 75 degrees Celsius
STOP: Total power lower than 4.8kW and max.
STOP: Inner temperature lower than 65 degrees Celsius.
Im still happy with my GSL12k Hybrid inverter for what i need it to do, to control my 3 tesla powerwall to discharged and charged only between 20%-90%, with my DIY 28.5 kw Lifepo4 battery as energy buffer And Trying to use Daly Bms and Daly interface board to communicate with the inverter, but...
there's a solution for grid assist with the no export firmware the public & test, by using grid peak shaving but it will pull 80-100watt from the grid all the time, this will prevent exporting to the grid, this has been tested and i also run with this kind of set up, and i know couple 18kpv...
True fact about the GSL inverter what @Wrt83 Said ^
As long you are connected to the grid, the inverter relay is capable 200 amp between the grid input and output (EPS). when in offgrid the output will only provide 12,000 watts or 50 amp…
Battery= whatever you set the discharge amp thats all...
if everything is unchecked the inverter will be in Self Consumption mode, which the inverter will provide power to the house load with solar then battery (if solar production is not enough to cover the house load) then grid will provide power to the house load, if solar and battery is not...
you don’t have to parallel the inverter right now until you battery arrive. How my battery you going to have on your system? the GSL inverter is a grid tie so you can use it now. In fact you can put all your solar panel in one GSL inverter it’s capable of 18k of solar panel input… but its more...
This topic is about the inverter, not Lux Power and Ninbo Huayu Technology or your opinion. Your free to make a new topic but not here, in my opinion it don’t really matter as long my distributor give customer services on the inverter.
Ac coupling on the gen port only works when the inverter is not connected to the grid, ac coupling on the load side seem to works on my inverter, I believe the newer firmware only can parallel 4 inverter for now….
The reason why I asked people to see their settings because I don’t guess what to tell them i have to compare their settings then i tell them why isn’t working, either i asked permission to correct it or i can tell them how to correct it. Then this is up to the person if he want to share here...
as of now it can be set 0-90%, lux been updating the web and app recently. i think it would be better if you cycle your battery from 100% to 80-90%, its better for the battery than to always stay at 100%.. if you still want to kept it at 100% use charge first and set it to 100% and use the timer...
your inverters were set to charge at 300A, if you do the base math 300Adc*51.2=15.3kw per inverters was pushing about 7.6kw(31.6A ac). I would recommend changing per inverter setting of the Charge Current Limit (Adc) to100A.
the question is if the inverter is OFF. the only way to power down the inverter is to disconnect the grid input, battery and solar. how do you pass through ac if the grid input is off. i believe if the inverter is in standby mode, fault and failed while in grid then yes it will pass through.
the latest firmware update is for zero export, it acts like off grid mode. if you need a grid assist this firmware is not for you. DM me or SS if you want to change firmware.
Homeassistant don’t need internet to work it is a local network so aslong you are in the same network you will receive notifications from Homeassistant.
DIY Battery is best for the money if you know what your doing…
my system been running since October with ac couple on the EPS LOAD. With the new firmware the ac couple on Gen port only works when not connected to the grid.
Our inverter is capable to charge and discharge at 250A DC Max. or 50A Ac continuously which is 12kw and short peak at 24k for 1 sec… I...
You can replace your existing grid tie inverter with the GSL inverter now, without batteries it will work just like your grid tie inverter. I already tested this while I worked on my DIY Battery. And when your battery comes all you have to do is connect your battery and change the setting on the...
when I got my inverter last October, the grid peak shaving feature work like what says in the manual, but after couple update the behavior of grid peak shaving changed, i did all kind a test and i figured it out that it will charge the battery with ac, if the setting of kw is higher than the...