is my new ep/ever controller done for?
- Thread starter prkrgrp
- Start date
Kiwi2000
Solar Enthusiast
ScrotpusGobbleBottom
Corn Pop was a bad dude.
good to know! Thank you.
dopeassjackson
New Member
I would try a factory reset to default settings along with unplugging the Mt50 and checking the actual outputs before condemning the unit.
I have the same BN series controller and it's been running nonstop for 2.5yrs. Granted it's only got 700w of shaded pannels on it. but if I was to buy another I would spend the extra $40-50 for a victron version.
I have the same BN series controller and it's been running nonstop for 2.5yrs. Granted it's only got 700w of shaded pannels on it. but if I was to buy another I would spend the extra $40-50 for a victron version.
today the new 100a controller is here the epever is fried and the response I got from tech support was a 4 page electrical engineers form to fill out lol I could barely read it let alone fill it out there was no reason with all of the safety features ( h/c temp- over charge/undercharge- hot disconnect- over charge disconnect ect on it goes) it should have not failed and I get 4 page report to fill out in place of support. what I am learning is you might as well buy 2 cheap ones for the same price as the so called good ones and get 2 times the power anyway I got the 100 a controller for the same price as the 40a epever if it works I will post the brand name
Similar threads
