Does anybody have any suggestions as to what I should do next?
Yeah, the voltage stopped increasing said it was taking current though. But according to voltmeters it wasn’t, does that make sense?
My Daly would cut charging when it thought the battery was at 100%.
lol no, you misunderstand me. I mean I don’t want to use that app daily only when necessary. I’ll just use my Gorilla app.
The voltage will climb very slowly while charging, except when the battery is nearly fully charged at which point the voltage will climb more rapidly. Below about 95% SOC the rate of voltage change is very slow.Yeah, the voltage stopped increasing said it was taking current though. But according to voltmeters it wasn’t, does that make sense?
Yeah, the voltage stopped increasing said it was taking current though. But according to voltmeters it wasn’t, does that make sense?
This is correct.The voltage will climb very slowly while charging, except when the battery is nearly fully charged at which point the voltage will climb more rapidly. Below about 95% SOC the rate of voltage change is very slow.
You sort of seem like you are afraid of dumping current into a battery that doesnt have a noticeable effect on voltage.I sort of understand most of it
This more pertains to lithium cobalt chemistries. Lifepo4 is lithium iron phosphate.not charging batteries over 80%
This could be what your problem is. If you constantly charge to 80% and never hit 100 it will certainly confuse the BMS and the % numbers would be pretty worthless and would drift.not charging batteries over 80%