ok this is what I have thus far. it is still not a chart like I should be doing but that is because I lost some data.
And overall I think I should not spend time on coiols that have no hope to ever become revered.
The biggest issue is that many data points fluctuate all the time due to my test bench is just crap. nee beyond that even.
So I will conciser going full steel to make any flex a thing of the past. Sure it will hurt the budget but I just do not like this current state of weird data I am getting,
Anyway here goes to the best of my current abilities.
I am sure I screwed up many times.
-----
Also I am now focusing on when I run similar trials with a 5 - 10 -5 coil @ 1.25mm diam then of course I need to ramp up the motor really high to get anywhere near the voltage needed to be able to pulse charge the Lifepo4 cell.
But I can already tell that when I do that then the ampDC is going well high like in the 0.5 range.
I am also going to reintroduce iron filled cores as soon as we have gone full steel.
It should be possible to DIY a structure that simply does not budge at the forces we are talking about here. (+- 500mT that is!!)
ehh no. it is that tesla value at one point. so now extrapolate the whole disk. my lord things will need to become sturdy!!
Even going full steel I am not sure I can pull it off.