I've recently installed an 18k in a shed. I have some extra panels that I plan on placing on the shed roof using a microinverter into the 18K gen port because the three MPPTs are already being used. I'd like to also add a circuit panel to the shed in order to have some lighting and 120v outlets.
Is it possible to use AC coupling and connect to GEN port on the 18k into a breaker on a circuit panel and then tie in the microinverters to another breaker in the circuit panel?
I realize that the frequency shifting may cause issues with the lighting and/or devices plugged into the outlets, but they will likely not be used very often anyways.
Any help is appreciated. Thanks.
Is it possible to use AC coupling and connect to GEN port on the 18k into a breaker on a circuit panel and then tie in the microinverters to another breaker in the circuit panel?
I realize that the frequency shifting may cause issues with the lighting and/or devices plugged into the outlets, but they will likely not be used very often anyways.
Any help is appreciated. Thanks.