ArthurEld

Well that was easy, I not going to worry about the ferrules. I have an infrared cam and I will pull 200amp and see how it goes.

The crimper I bought looks like the shape of the clamp on the breaker. But the ferrule doesn't turn out the same shape as the crimper...

Those Wirefy are the best connectors for balance leads that I have seen. But I was just looking at what you mean about trimming the...

Guys, I'm having trouble with these ferrules. I'm starting to wonder if we should just put the wire in the breaker. I'm using 2 AWG...

Hey what ring terminals did you guys use for these red battery wires? The ones I chose originally fit but the insulator is getting...

It took me two years to build a shed and move my inverter in it after I decided I wasn't using batteries under my home roof. My cells...

Uh oh, that means I could easily swap out my 'older style' JK's for the inverter with new faceplate's...💡🤔💸

Do you know solar assistant? I'm going to use it and apparently I must use RS485 for communication between deye and seplos

Yes I agree, I actually called them and they check to see if they could get a 4/0 cable in that connector. They said they could only get...

Maybe someone could help me. I am paralleling 4 EG4 Powerpro's so they all have to connect to a busbar. The longest length from a...

Start with listing what Canbus protocols the Solark will work with and then the JK list (which does can added to as the firmware is...

Very cool that you seem to be making progress kommando. I hope to make the JK-PB2A16S20P BMS work with my Solark. But I don't find any...

I have 5 of the 4.3" displays to go with my 5 cases. Amy said the BMS and 2 plates weigh 7-8kg. She will get back to me when she has...

I chatted with Amy about a closed loop JK BMS for one of my batteries. I will also order the BMS mounting plate and a new face plate...

28.2V = 3.525 Volts per cell in 8S. That is 1.25V over Working voltage and does NOTHING other than stress the cells. 3.450 is pretty...

Thanks Steve for the detailed reply and great labeled picture. These batteries are going to be fantastic. I used lugs and busbars to...

I am planning to use these Temco Butt Splices to connect my BMS to the battery. I will cover the splice with heat shrink tubing. What...

I'm just tired.

No rush S.Davis I am not making rapid progress myself. I just try to keep my retired self amused while making my batteries easier for my...

I am looking forward to seeing your setup. Are you using closed loop BMSs?