Carly
New Member
- Joined
- Dec 29, 2019
- Messages
- 86
Recently installed this BMS with 24v 8S Eve 280s and Victron Multiplus 3000 with CerboGx. Everything seems to work, but there's a minor issue:
Seller requested I send photos of how it was connected, which I sent. After doing some basic troubleshooting (re-seating connections, restarting, etc.), I ordered a second JK PB2A16S20P. And I continue to have the exact same issue. The hardware and firmware were the same (I just returned the first one - was refunded within 4 days, btw).
Does this sound like a possible firmware issue? EDIT: Currently Hardware V15.XA and Software V15.21. I don't have the adapter to upgrade it yet, but that's the only thing left I can think of to try.
Thank you.
- Temperature sensor alarm (yellow on the app, red on 4.3" screen) has been on since installation
- Temperatures appear to reading normally on app (~25 c) BUT...
- Temp sensor 1 and 2 seem to be reversed in the BMS - I have them installed correctly, but when I touch sensor 1, the app shows sensor 2 temp increase & vice versa.
Seller requested I send photos of how it was connected, which I sent. After doing some basic troubleshooting (re-seating connections, restarting, etc.), I ordered a second JK PB2A16S20P. And I continue to have the exact same issue. The hardware and firmware were the same (I just returned the first one - was refunded within 4 days, btw).
Does this sound like a possible firmware issue? EDIT: Currently Hardware V15.XA and Software V15.21. I don't have the adapter to upgrade it yet, but that's the only thing left I can think of to try.
Thank you.
Last edited: