Steve_S
Offgrid Cabineer, N.E. Ontario, Canada
Hi Folks,
I am posting this in here as many seem apparently unaware about MIdnite Solar Inc (USA) and the various products they make. Given a large majority of people here are looking at smaller systems for their cabins, rv's & boats, I felt I should highlight this product line for people to consider.
Disclosure: I have NO TIES at all with MIdnite Inc, I'm just a very satisfied customer. The few minor support issues I had were immediately handled in a most proactive & efficient way and I have to say I am not only impressed with the company, it's products but the support available as well. They Treat you like a Customer, NOT a Consumer !
I am posting this in here as many seem apparently unaware about MIdnite Solar Inc (USA) and the various products they make. Given a large majority of people here are looking at smaller systems for their cabins, rv's & boats, I felt I should highlight this product line for people to consider.
Disclosure: I have NO TIES at all with MIdnite Inc, I'm just a very satisfied customer. The few minor support issues I had were immediately handled in a most proactive & efficient way and I have to say I am not only impressed with the company, it's products but the support available as well. They Treat you like a Customer, NOT a Consumer !
Now ETL listed to UL1741, CSA 22.2 and UL458. This may be the only MPPT controller listed for use on marine craft and RV's
The KID is the most versatile medium sized charge controller on the market, ideal for small renewable energy systems. The KID allows for true input paralleling. As your power needs grow, add more modules to the array and a second KID. This will give twice the power from a single array.
The KID's HyperVOC feature allows up to 162VOC . (The KID will not be harmed by voltages between 150 and 162VDC (this is the HyperVOC range). However the KID will remain in standby until the voltage is 150v or below.)
http://www.midnitesolar.com/pages/kid/index.php
The KID "Kit" $650 USD MSRP
Includes:
- MidNite KID MPPT charge controller
- MidNite Big BABY box
- 2 of our MidNite MNEPV30 breakers, One for the PV input and one for the battery output
- 1 of our 63 amp DC ground fault breakers for the PV side of the KID
- 1 Battery temperature sensor
- Conduit and adapters
- Wire and strain reliefs ETC
- Built in Arlington, WA USA
- Warranty - 5 yrs.