diy solar

diy solar

Today's Daly SmartBMS Android App Update forces a firmware update which fails

skyhawk1337 said:
my android app didn't find any bms bluetooth signal...
and when i open daly bms official app i find my bms bluetooth signal...
Click to expand...

have you pressed the plus sign on the top right and select firmware file? as i remember, bluetooth should appear once the firmware is selected
 
Hello someone has the firmware GD32E230_303_32_221130_100T ? I would be very grateful for that.
 
Vorher Mal ein reset oder spannungfrei machen, dann sollte die bt-id erscheinen.
Andere Apps müssen geschlossen sein.
Dann evtl. mehrmals die BT Update App starten. Irgendwann erscheinen die IDs
 
HarryHase said:
Vorher Mal ein reset oder spannungfrei machen, dann sollte die bt-id erscheinen.
Andere Apps müssen geschlossen sein.
Dann evtl. mehrmals die BT Update App starten. Irgendwann erscheinen die IDs
Click to expand...
Alles probiert. Ich verstehs nicht. Direkt unter bluetooth scheint meine bt-id auf, sobald ich die BT Update App öffne erscheint kein Gerät. Mittlerweile versuche ich es auf 3 verschiedenen Smartphones ?
 
Hast Du Mal das Bluetooth Modul abgezogen, wieder angesteckt, den Knopf gedrückt. Alle anderen Handy ausgeschaltet?
Wenn ich die daly App offen hatte bekomme ich auch keine Verbindung.
 
Salut tuturor ,unde pot găsi firmware-ul pt lifepo 4s 12v 100ah ,atașat în poza alăturată,va multumesc tuturor
 

Attachments

  • Screenshot_20221231-012423_Messenger.jpg
    Screenshot_20221231-012423_Messenger.jpg
    134.8 KB · Views: 44
Hi all, 4S Users,

For my daly 4S 12V 100A (see pic) i ve gotten the firmware-file:
BmsGD32E230_303(32_221130_100T)基版本.s19
direct from Daly. (It is here in the forum).

After deleting the chinese signs in the name, i can flash the file via BmsMonitor 2.1.9 and
serial UART Adpater into BMS without errors.

Updating via Bluetooth does not work in any configuration.

After restarting the BMS (switching off-on) i can read the parameters with BmsMonitor,
but i did NOT get values from the sensors (Ubat 1-4, and Temp.)

So i think I shoot down the ADCs ???
or does anybody know a trick to activate the ADCs ? an other firmware maybe ?

Thanks J.R. bms.jpg
 
buana said:
pentru a rezolva problema pe bms daly cred că se poate face doar prin schimbarea firmware-ului. Următorul este un tutorial bun cu un PC sau telefon Android și firmware pe care l-am primit de la Daly.
acum bms-ul meu a revenit la lucru normal
Sper că în viitor Daly nu va mai face prostii de genul acesta
Click to expand...
Salut de unde ai descarcat aceste firmware, caut și eu pt 4s 12v 100ah dar nu gasesc
 

Attachments

  • Screenshot_20221231-012423_Messenger.jpg
    Screenshot_20221231-012423_Messenger.jpg
    134.8 KB · Views: 19
I have updated 4s 150A from ....LEDT to 32_221130_100T with Android App
 

Attachments

  • Screenshot_20221231_130914_SMART BMS.jpg
    Screenshot_20221231_130914_SMART BMS.jpg
    139.3 KB · Views: 39
Somers said:
y
Somers said:
yes
Click to expand...
Click to expand...

jr2 said:
Hi all, 4S Users,

For my daly 4S 12V 100A (see pic) i ve gotten the firmware-file:
BmsGD32E230_303(32_221130_100T)基版本.s19
direct from Daly. (It is here in the forum).

After deleting the chinese signs in the name, i can flash the file via BmsMonitor 2.1.9 and
serial UART Adpater into BMS without errors.

Updating via Bluetooth does not work in any configuration.

After restarting the BMS (switching off-on) i can read the parameters with BmsMonitor,
but i did NOT get values from the sensors (Ubat 1-4, and Temp.)

So i think I shoot down the ADCs ???
or does anybody know a trick to activate the ADCs ? an other firmware maybe ?

Thanks J.R. View attachment 127138
Click to expand...
Where is this firmware? Can you post it here?
 
Here it is, removed the chinese signs in filename, good luck and give me a reply if it works ... please first unzip...
 

Attachments

  • BmsGD32E230_303(32_221130_100T).s19.zip
    49 KB · Views: 111
jr2 said:
Привет всем, пользователи 4S,

Для моего daly 4S 12V 100A (см. рис.) я получил файл прошивки:
BmsGD32E230_303(32_221130_100T)基版本.s19
прямо из Дали. (есть здесь на форуме).

После удаления китайских знаков в имени могу прошить файл через BmsMonitor 2.1.9 и
последовательный адаптер UART в BMS без ошибок.

Обновление через Bluetooth не работает ни в одной конфигурации.

После перезапуска BMS (включение-выключение) я могу прочитать параметры с помощью BmsMonitor,
но я НЕ получил значения от датчиков (Ubat 1-4 и Temp.)

Так что я думаю, что я сбиваю АЦП ???
или кто-нибудь знает трюк для активации АЦП? может другая прошивка?

Спасибо, младший.View attachment 127138
Click to expand...
I succeeded. ran update -code for 4s 220736.
 
Here it is, removed the chinese signs in filename, good luck and give me a reply if it works ...
 
no, it is not working correct at me ,see my post #150. and no, i need no code , i update via UART and RS232 at PC.
 
You must log in or register to reply here.

Similar threads

T
Seplos BMS compatible mobile app- Bluetooth
Replies
6
Views
2K
beckkl
B
Zakharov
EG4 LP4 Communications Hub firmware update fails
Replies
9
Views
419
Zakharov
Zakharov
apctjb
New Daly 100A BMS with active balance and remote monitoring via cloud.
Replies
7
Views
1K
mehmetaliyilmaz
mehmetaliyilmaz
X
Daly Smart-BMS and IOS App stop working
Replies
16
Views
5K
ELEL
E
F
Daly BMS not showing SOC
2
Replies
22
Views
3K
Freeman656
F
Back
Top