Signature SolarWell, where did you buy them? ^^
EG4electronics.com will have all of the most recent firmware updates availableIs the EG4 6500 inverter firmware upgradeable ? If so where can I get the firmware and what is the procedure to upgrade ?
Same question again for the EG4 battery.
Thanks for any help !
Ok that's good but are the EG4 devices firmware upgradeable ? Lets say firmware improvements become available in the future (improvement or bug fix)). Will the firmware be published ? Thank youEG4electronics.com will have all of the most recent firmware updates available
Yes, there is updated firmware on the website with links on how to installOk that's good but are the EG4 devices firmware upgradeable ? Lets say firmware improvements become available in the future (improvement or bug fix)). Will the firmware be published ? Thank you
Easier said than done....lolYes, there is updated firmware on the website with links on how to install
I have the same hardware as you. Let me know your solution, my inverters are 1 month out from operation. Thanks !Easier said than done....lol
I've recently purchased an EG4 6.5 inverter and EG4 LP4 battery.....I went to their website and followed their directions and the inverter won't connect to my laptop via their download???
Their video indicates using two cables supplied but the cables I received were different. I received:
- male serial to female serial (gray)
- female serial to an RJ45 connector (gray)
- RJ45 connector to a 2 wire USB (yellow)
I assumed the method of connecting the two gray cables like shown in the video was replaced by the yellow cable I received????
If so, they won't connect.....any help would be appreciated???
Hello Ben,Yes, there is updated firmware on the website with links on how to install
Would you DM me your info, I'll get someone in touch with you to get you fixed up.Hello Ben,
I encountered two challenges with EG4 software/firmware. Appreciate your help.
#1 - Attempted to install the SolarPower application (from CD that came with EG4 6000EX-48HV inverter) onto my Windows 11 laptop but the install failed. First it failed with error "invalid GUI". I followed instructions to run it from command line with -i, and it got passed the GUI error, and seemed to finish, but the app is nowhere to be found. There is no way to invoice the app.
#2 - I downloaded "New-6k-Firmware.zip" from the EG4 downloads webpage, but when attempting to run "InfiniVMasterCPU_Reflash .exe" my Norton Antivirus software states that the software is "unsafe and has been removed". The same happens with "RemotePanel_ReflashTool.exe"
Where can I get a working copy of SolarPower and sanitized firmware for my 6000EX-48HV?
Thank you
Thanks Ben,Would you DM me your info, I'll get someone in touch with you to get you fixed up.
Hey @SunFarmer did you get this resolved?In the meantime, I'm resurrecting a Windows 10 laptop to try
Right?Jeez, you are making me relive that crap.
Why did you do this? Who's idea was it? SS is pretty specific about making battery 0000 the primary.And, I re-adressed my batteries, now unit zero is at the bottom and unit three is at the top, with the BMS cable connected to the top battery, and swapped the ends of the cable.
Mr. galstaf,
Regarding monitoring app and firmware for EG4 6000EX....
Here is response I received from Signature Solar while I was trying to get it to work. Hope it helps you a bit. In my case, I think I made the most progress after switching from a Win11 laptop to Win10 and getting a new USB-RS232 dongle with fresh drivers.
Good luck
---------------------------------------------------
View attachment 130526