SolarNewbTPA
New Member
- Joined
- Dec 29, 2022
- Messages
- 4
Hello, I am wanting to power my Peplink Balance 30 Router from my solar system. This router runs native 12V, but ships with an AC adapter which is 110 AC to 12V DC / 5 AMP / 60 Watt. The device itself lists 12V with a 40 Watt Max. I am attempting to eliminate the AC adapter, but the device will not power on that way. I am thinking the issue here is with the 40W max specification on the device. Thankfully I did not toast the router on my first attempt as it still runs correctly from the AC adapter.
I am thinking of adding a 4Ω resistor and trying again. Will this solve my problem? If so, did I do my Watts to Ohms math correctly? If not, what am I missing? Any input will be greatly appreciated.
I am thinking of adding a 4Ω resistor and trying again. Will this solve my problem? If so, did I do my Watts to Ohms math correctly? If not, what am I missing? Any input will be greatly appreciated.