I have seen people say start balancing at 3.3V.
And others saying anything below 3.45V is ineffective.
Assume a battery pack 25.6V 200Ah (8x 200Ah cells)
They're not balanced. But assembled into a pack and already in use.
Daly Smart BMS+ Daly Smart Active Balancer 1A
(Load is Around 300~600W loads)
What start balancing setting would be best for this pack with a 1A Smart Active Balancer?(balancer is already connected to the pack. Daly Bms passive balancing seems useless.)
Thanks in advance!
(Inverter charging current is 30A and there is no solar. Only batt+inv)
And others saying anything below 3.45V is ineffective.
Assume a battery pack 25.6V 200Ah (8x 200Ah cells)
They're not balanced. But assembled into a pack and already in use.
Daly Smart BMS+ Daly Smart Active Balancer 1A
(Load is Around 300~600W loads)
What start balancing setting would be best for this pack with a 1A Smart Active Balancer?(balancer is already connected to the pack. Daly Bms passive balancing seems useless.)
Thanks in advance!
(Inverter charging current is 30A and there is no solar. Only batt+inv)