Ah setup aili batt monitor

[Ruben]

Hi guys,
Just to confirm if i did set up my ah right in the
Aili battery monitor

my solar system is 24v
I have 24 , 190 ah batteries
12 pairs to make the 24v

so i setup the ah as following

12x 190ah = 2280ah
Ofcourse only 50% usable , that makes it
1140ah

so as i reach 0%on the monitor it really means ive
reached 50% battery %

is the 1140ah the correct ah i need to setup
the aili monitor??

let me know please if its correct

btw : the aili only reaches 999ah ???

 

[shavermcspud]

You haven't stated what batteries you are using? i presume they 6v so 2s12p? if so that's 2280 ah 12x190ah

 

[Ruben]

12v batteries
24 in total , 12 pairs wired in series

 

[shavermcspud]

12v batteries
24 in total , 12 pairs wired in series

Things will go bang if you have 12 x12volt batteries in series for a 24v system. series increases voltage so that would be 144v output.

For your configuration you need 2x 12v batteries in series to give you 24volts and 12 in parallel 2s12p that would give you 24 volts with 2280 ah 1140 ah usable. you will need a serious charge controller and PV system to charge that lot at 24v

 

[Ruben]

Sorry that i explained wrong!!
Yes the batteries are connected just as you wrote
2x 12volt in series

And i have 2 victrons
100/50 and a 150/100
The 100/50 is allready working and the 150/100 i am wiring this weekend

thnks for your input

 

[Ruben]

Forgot this

i have 10 sollar panels on the roof
each 240 watts and gonna add 4 more