metalheaddoc
New Member
I have an AiLi battery shunt monitor on my system which has 2 12v 100ah batteries in parallel. I am having trouble with accuracy. I have the monitor set to 200ah and I recently fully charged my batteries and reset the monitor to 100% as per the manual. I have let my system sit idle for a few weeks without panels. The monitor still reads 100% but I have been charging my system for over an hour at about 100W input and it is still taking input. So my batteries were at least down to 94% (2300/2400) by my calculation but the meter never budged from 100%. Can anyone explain this?
EDIT:
I checked the voltage of the batteries which is 13.47v. The manual says that is between 90 and 100%, closer to 100%
EDIT:
I checked the voltage of the batteries which is 13.47v. The manual says that is between 90 and 100%, closer to 100%
Last edited: