grall1126
New Member
Hi,
I connected the panel to the e600 Pecron and my charge wattage only was between 10-20
The Pecron manual has it PV/DC 12v-18v, 100w maximum; VOC (open circuit voltage) of solar panel must be less than 25v
Bluetti Solar panel specs
Voltage at max power 19.8V
Current at max power 6.06A
Open circuit voltage 23.7V
Short Circuit Current 6.66A
Only thing that could be hindering a higher input of solar watts would be the adapter plug from the MC4. However, I used another MC 4 attachment and it did the same thing.
What do you guys think?
I connected the panel to the e600 Pecron and my charge wattage only was between 10-20
The Pecron manual has it PV/DC 12v-18v, 100w maximum; VOC (open circuit voltage) of solar panel must be less than 25v
Bluetti Solar panel specs
Voltage at max power 19.8V
Current at max power 6.06A
Open circuit voltage 23.7V
Short Circuit Current 6.66A
Only thing that could be hindering a higher input of solar watts would be the adapter plug from the MC4. However, I used another MC 4 attachment and it did the same thing.
What do you guys think?