Hey,
I'm looking for a setup to charge Bluetti AC200 using portable solar setup (preferably, folding setup).
The problem is that the AC200 require 35v minimum for it's MPTT charger.
I've seen quite a few posts about hooking up multiple 12v 100w (or 200w) panels in serial - but that would require 3-4 panels. Carrying so many panels is not very portable - even if they're folding or suitcase style.
My question is - would 2x of these (or similar) folding solar panels work or would never reach the voltage required for the AC200??
DOKIO 150w
Maximum Power: 150W
Optimum Operating Current (Imp):8.89A
Optimum Operating Voltage (Vmp): 18V
Short-Circuit Current (Isc):9.14A
Open-Circuit Voltage (Voc): 22.5V
Maximum System Voltage:600V DC (UL)
Theoretically, it says Optimum Operating Voltage is 18v - so 2x in series, it should be 36v, which should be enough for the AC200 right? or am I missing anything?!
Thanks!!!
I'm looking for a setup to charge Bluetti AC200 using portable solar setup (preferably, folding setup).
The problem is that the AC200 require 35v minimum for it's MPTT charger.
I've seen quite a few posts about hooking up multiple 12v 100w (or 200w) panels in serial - but that would require 3-4 panels. Carrying so many panels is not very portable - even if they're folding or suitcase style.
My question is - would 2x of these (or similar) folding solar panels work or would never reach the voltage required for the AC200??
DOKIO 150w
Maximum Power: 150W
Optimum Operating Current (Imp):8.89A
Optimum Operating Voltage (Vmp): 18V
Short-Circuit Current (Isc):9.14A
Open-Circuit Voltage (Voc): 22.5V
Maximum System Voltage:600V DC (UL)
Theoretically, it says Optimum Operating Voltage is 18v - so 2x in series, it should be 36v, which should be enough for the AC200 right? or am I missing anything?!
Thanks!!!