Tropenhelm
New Member
Hi. My first Post here, so be kind.
I got a Bluetti AC200 max with the two expansion packs. 1600W of panels on the roof in two groups to max out maximum solar input for the AC200max.
This setup is running now for two years and has no problems.
I have loads that only take 36% out of the 6.1KW until the next day Sunlight phase.
So far so good. The Bluetti doesn’t have a monitor to check on actual KW input over time. Day/Week/Month/Year/Total.
How ond with what hardware can I accomplish this. I thought of something that can be just measure the incoming cables from the two solar Arrays. Is this wrong thinking? Or does it have to be measured somewhere else in the system.
I tried to find some answers here but can’t really comprehend what is written, as im not to technical inclined into this topic.
Thanks for any advice.
HF.
I got a Bluetti AC200 max with the two expansion packs. 1600W of panels on the roof in two groups to max out maximum solar input for the AC200max.
This setup is running now for two years and has no problems.
I have loads that only take 36% out of the 6.1KW until the next day Sunlight phase.
So far so good. The Bluetti doesn’t have a monitor to check on actual KW input over time. Day/Week/Month/Year/Total.
How ond with what hardware can I accomplish this. I thought of something that can be just measure the incoming cables from the two solar Arrays. Is this wrong thinking? Or does it have to be measured somewhere else in the system.
I tried to find some answers here but can’t really comprehend what is written, as im not to technical inclined into this topic.
Thanks for any advice.
HF.
