davidhernandez
New Member
- Joined
- Jun 27, 2020
- Messages
- 10
I took delivery of two of these...used a parallel splitter cable and Anderson quick connects to charge them up with my MPP Solar LV5048 but it will not recognize a battery with a voltage reading of 5.1 volts (manual says minimum of 42 volts)...so the one delivered at 52.5 volts charged up nicely and the one delivered at 5.1 went up to 6.1.
Tried to charge alone with the MPP Solar LV5048 but no luck...will not recognize and charge.
It will be a few months before my array is up...What other way can I charge up this battery bank to make sure it's ok? It would be a big and difficult deal to send it back.
Additional strange fact: both purchased from tech direct but both cabinets have the bigbattery.com logo plate on them.
Thank you for any suggestions!
David Hernandez
Tried to charge alone with the MPP Solar LV5048 but no luck...will not recognize and charge.
It will be a few months before my array is up...What other way can I charge up this battery bank to make sure it's ok? It would be a big and difficult deal to send it back.
Additional strange fact: both purchased from tech direct but both cabinets have the bigbattery.com logo plate on them.
Thank you for any suggestions!
David Hernandez