david.ledeaux
New Member
- Joined
- Feb 16, 2022
- Messages
- 11
I just set up my Sol-Ark system and configured with Grid Sell + Limited to Home. In my house I'm using 250 to 300 watts but in the chart, it's reversed. It thinks I'm using 2100 watts. I verified with a clamp meter that at the time the Sol-Ark was pushing 8 to 9 amps to the grid and sipping power on my main service panel.
Could it be the placement of my CT sensors in relation to my solar breaker? I have a bus bar so no way to clamp my CT sensors further up in the chain. My CTs are the red circles around the wires on the left breaker. My solar breaker is to the right of the 100 amp breaker (drawn in red)
Could it be the placement of my CT sensors in relation to my solar breaker? I have a bus bar so no way to clamp my CT sensors further up in the chain. My CTs are the red circles around the wires on the left breaker. My solar breaker is to the right of the 100 amp breaker (drawn in red)