Connect two JK BMS to Can Bus so inverter can control both

[RGIvy]

Hi folks

A request for info from someone, and I’m unsure of the answer as I’ve never tried it.

He wants to control two batteries with JK BMS using the same Can Bus. He wants the inverter to control various things.
I would have suggested a Multiplus but he wants to go a different route.

Anyone tried this?

TIA

 

[sunshine_eggo]

The Victrons aren't controlling anything. They are being controlled by the BMS.

 

[RGIvy]

The Victrons aren't controlling anything. They are being controlled by the BMS.

Using the assistants you can control various aspects, such as when to charge batteries from the grid and the choice of using battery vs grid etc.
But he’d rather control things from his inverter.

 

[sunshine_eggo]

Using the assistants you can control various aspects, such as when to charge batteries from the grid and the choice of using battery vs grid etc.
But he’d rather control things from his inverter.

That's independent of any BMS. It can be done with lead acid, and it's done exclusively from the inverter. Do either of you really understand what he wants?