Connecting to LVX6048WP via USB with raspberry pi

[Redacted]

Hi I am having issues with connectivity to my LVX6048WP to my raspberry pi over USB to the Inverter.


I have been using this https://github.com/ned-kelly/docker-voltronic-homeassistant on the pi and everything seems to be ok but I am getting errors when connecting via usb

Thu Sep 8 17:41:27 2022 INVERTER: Current CRC: 49 C1
Thu Sep 8 17:41:27 2022 INVERTER: QMOD reply size (5 bytes)
▒hu Sep 8 17:41:27 2022 INVERTER: QMOD: incorrect start/stop bytes. Buffer: ^0
Thu Sep 8 17:41:27 2022 INVERTER: Current CRC: B7 A9
Thu Sep 8 17:41:30 2022 INVERTER: QPIGS read timeout
Thu Sep 8 17:41:30 2022 INVERTER: QPIGS reply too short (8 bytes)
Thu Sep 8 17:41:30 2022 INVERTER: Current CRC: F8 54
Thu Sep 8 17:41:33 2022 INVERTER: QPIRI read timeout
Thu Sep 8 17:41:33 2022 INVERTER: QPIRI reply too short (8 bytes)
Thu Sep 8 17:41:33 2022 INVERTER: Current CRC: B4 DA
Thu Sep 8 17:41:36 2022 INVERTER: QPIWS read timeout
Thu Sep 8 17:41:36 2022 INVERTER: QPIWS reply too short (8 bytes)


I am super new to this, had the system for 2 weeks now and already managed to drain my batteries ?‍


Any help is appreciated, thanks

 

[nc73]

Have you tried a new cable?

 

[Redacted]

I ended up going with solar assistant and it is working ok, There are a few settings from solar-assistant that are not working withe the LVX6048WP but I have contacted them and they are updating for the new firmware.

Solar-assitant was able to read all my inverters stats on first connection