If I measure on the + on the anderson and the blue wire on the daly I get 26v (being the - on the pack)
On the - on the anderson zero.
So it is pointed to the interior of the daly
But have you measured from positive to the black wire on the Daly (not just the anderson connector)? Did you build the connector yourself, or is it spliced?
Update.
I had the time to look at it again.
Stopped the discharge. Restarted it. No effect. Resetted it to default
Now I measured 26v on the Anderson.
Hurray!
Thanks all for the input. I know a bit more of these bms' es