el jefe
New Member
so far ive had difficulty finding any info on what i plan on doing and am hoping for some feedback on my plans.
i have a stationary 50 amp rv that gets used primarily on weekends but not all weekends and sometimes for 3-4 days at a time.
i just wired up my eg4 6000xp, eg4 14.2 kw powerwall and 16 300 watt hyundai panels on two series strings. i havnt turned it on yet.
from the load out lugs of the inverter i ran 6ga wire to one of those prewired 110/30a/50a rv pedastal panels.
my questions are :
-do i ground the rv panel? assuming the inverter comes unbonded from the factory and the rv having a chassis ground.
-am i thinking correctly about how my design works?
my understanding of a 50amp rv panel is it is two seperate hot legs feeding its panel when plugged into a 50amp plug and only one half of the panel is hot when using a 30amp adapter.
thanks in advance
i have a stationary 50 amp rv that gets used primarily on weekends but not all weekends and sometimes for 3-4 days at a time.
i just wired up my eg4 6000xp, eg4 14.2 kw powerwall and 16 300 watt hyundai panels on two series strings. i havnt turned it on yet.
from the load out lugs of the inverter i ran 6ga wire to one of those prewired 110/30a/50a rv pedastal panels.
my questions are :
-do i ground the rv panel? assuming the inverter comes unbonded from the factory and the rv having a chassis ground.
-am i thinking correctly about how my design works?
my understanding of a 50amp rv panel is it is two seperate hot legs feeding its panel when plugged into a 50amp plug and only one half of the panel is hot when using a 30amp adapter.
thanks in advance