EG4 18k no AC voltage

[Systems Planet]

I finally got the EG4 18kpv charging 6 lifepower4 batteries to 59% charged.

How do I get AC line voltage?
I'm running in off-grid mode.

I have 150volts of PV but zero volts on Line1 and Line2.

 

[LydMekk]

Connect a LOAD to the output, preferreably behind a fuse.
Inverters doesn't just produce a steady wattage, they let the load PULL what it needs.

 

[Quattrohead]

Connect a LOAD to the output, preferreably behind a fuse.
Inverters doesn't just produce a steady wattage, they let the load PULL what it needs.

Sorry this is plain wrong.

 

[Quattrohead]

I finally got the EG4 18kpv charging 6 lifepower4 batteries to 59% charged.

How do I get AC line voltage?
I'm running in off-grid mode.

I have 150volts of PV but zero volts on Line1 and Line2.

You have to set the battery type to lead or get your battery comms setup.

 

[Systems Planet]

My batteries are communicating with the inverter.
The inverter shows the battery percent charged.

There are zero volts on L1 and L2

 

[Systems Planet]

Anyone know how to fix this
"eps terminal is disabled"?

 

[Quattrohead]

You are going to have to get with LUXpower or EG4/signature solar for that one.

 

[Systems Planet]

I figured it out.
It meant I had disabled the setting:
Power Backup Enable