Bridgetown
New Member
It seems that my risk is better understood if I knew how the EG4 6000EX-48HV is constructed. I may never know until I simply purchase the unit and make my own measurements. Naturally this is what I was trying to avoid.
What I think I learning if a purchase the EG4 6000EX-48HV low frequency inverter containing a transformer:
- Imbalance can be real.
- My neighbors power consumption "neutral imbalances" can have a negative effect on my invert's capacity. Of course, my imbalances will need to be in check.
- Protecting my inverter's capacity with an isolation transformer seems to be a solution I can understand. But wow! I wasn't anticipating this addition.
- Protecting the invert itself, depends upon the inverter's ability to sense its' own temperature and/or possible measure its neutral current for early detection shutdown. Maybe I will learn the EG4 6000EX-48HV has these protections.
Well guys (RCinFLA & Hedges) thanks for the discussion!
What I think I learning if a purchase the EG4 6000EX-48HV low frequency inverter containing a transformer:
- Imbalance can be real.
- My neighbors power consumption "neutral imbalances" can have a negative effect on my invert's capacity. Of course, my imbalances will need to be in check.
- Protecting my inverter's capacity with an isolation transformer seems to be a solution I can understand. But wow! I wasn't anticipating this addition.
- Protecting the invert itself, depends upon the inverter's ability to sense its' own temperature and/or possible measure its neutral current for early detection shutdown. Maybe I will learn the EG4 6000EX-48HV has these protections.
Well guys (RCinFLA & Hedges) thanks for the discussion!